{"id":21792,"date":"2023-07-24T18:21:02","date_gmt":"2023-07-24T16:21:02","guid":{"rendered":"https:\/\/sisgeo.com\/unkategorisiert\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/"},"modified":"2023-07-24T18:21:02","modified_gmt":"2023-07-24T16:21:02","slug":"is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe","status":"publish","type":"post","link":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/","title":{"rendered":"FAQ#118 – Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?"},"content":{"rendered":"\n

No, this is not possible.
Sisgeo calibrates each probe individually, but each probe has its own small different properties, that have a certain influence on the readings.<\/p>\n\n\n\n

The international standard ISO 18674-3, describing the reference reading, states that:
„It is good practice to take an additional reference measurement with an independent probe that can be used as a backup“.
The direction suggested by the standard is therefore clear: if you change the measurement probe, you must take a new reference measurement with the new probe.<\/p>\n\n\n\n

However, with the KLION inclinometer data management software, Sisgeo offers a possibility to compare data from different probes. The method proposed by KLION can be applied by accepting 3 strong assumptions (see also the KLION software user manual<\/a>, starting on page 43):
1 – there was no movement between the first measurement with the new probe and the last reading with the old probe, so they can be considered to be coincident.
2 – the international standard ISO 18674-3 considers measurements taken with different probes to be non-comparable.
3 – international publications suggest not using this approach: the correct procedure when starting measurements on an existing inclinometer tube with a new probe is to start a new data analysis and processing by acquiring a new reference measurement.<\/p>\n\n\n\n

By accepting these assumptions, it will be possible to apply the ’new probe‘ function.<\/p>\n","protected":false},"excerpt":{"rendered":"

No, this is not possible.Sisgeo calibrates each probe individually, but each probe has its own small different properties, that have a certain influence on the readings. The international standard ISO 18674-3, describing the reference reading, states that:„It is good practice to take an additional reference measurement with an independent probe that can be used as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[445,502,451],"tags":[227],"class_list":["post-21792","post","type-post","status-publish","format-standard","hentry","category-b-r-a-in-mems-sonden-neigungsmesser-de","category-digital-inklinometer-mit-mems-sensoren","category-klion-software-for-inclinometers-and-t-rex-extensometers-de","tag-faq-de"],"yoast_head":"\nFAQ#118 - Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe? - Sisgeo<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"FAQ#118 - Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?\" \/>\n<meta property=\"og:description\" content=\"No, this is not possible.Sisgeo calibrates each probe individually, but each probe has its own small different properties, that have a certain influence on the readings. The international standard ISO 18674-3, describing the reference reading, states that:„It is good practice to take an additional reference measurement with an independent probe that can be used as […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\" \/>\n<meta property=\"og:site_name\" content=\"Sisgeo\" \/>\n<meta property=\"article:published_time\" content=\"2023-07-24T16:21:02+00:00\" \/>\n<meta name=\"author\" content=\"Staff Pipeline\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Verfasst von\" \/>\n\t<meta name=\"twitter:data1\" content=\"Staff Pipeline\" \/>\n\t<meta name=\"twitter:label2\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data2\" content=\"1\u00a0Minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\"},\"author\":{\"name\":\"Staff Pipeline\",\"@id\":\"https:\/\/sisgeo.com\/de\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2\"},\"headline\":\"FAQ#118 – Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?\",\"datePublished\":\"2023-07-24T16:21:02+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\"},\"wordCount\":248,\"publisher\":{\"@id\":\"https:\/\/sisgeo.com\/de\/#organization\"},\"keywords\":[\"H\u00c4UFIG GESTELLTE FRAGEN\"],\"articleSection\":[\"B.R.A.IN MEMS-sonden-neigungsmesser\",\"Digital-Inklinometer mit MEMS-Sensoren\",\"KLION software for inclinometers and T-Rex extensometers\"],\"inLanguage\":\"de\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\",\"url\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\",\"name\":\"FAQ#118 - Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe? - Sisgeo\",\"isPartOf\":{\"@id\":\"https:\/\/sisgeo.com\/de\/#website\"},\"datePublished\":\"2023-07-24T16:21:02+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/sisgeo.com\/de\/geotechnische-und-strukturelle-instrumentierung-fuer-shm\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Produkte\",\"item\":\"https:\/\/sisgeo.com\/de\/category\/products-de-2\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"B.R.A.IN MEMS-Sonden-Neigungsmesser\",\"item\":\"https:\/\/sisgeo.com\/de\/category\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"B.R.A.IN MEMS-sonden-neigungsmesser\",\"item\":\"https:\/\/sisgeo.com\/de\/category\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"FAQ#118 – Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/sisgeo.com\/de\/#website\",\"url\":\"https:\/\/sisgeo.com\/de\/\",\"name\":\"Sisgeo\",\"description\":\"Inclined to improvement\",\"publisher\":{\"@id\":\"https:\/\/sisgeo.com\/de\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/sisgeo.com\/de\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/sisgeo.com\/de\/#organization\",\"name\":\"Sisgeo S.r.l.\",\"url\":\"https:\/\/sisgeo.com\/de\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/sisgeo.com\/de\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png\",\"contentUrl\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png\",\"width\":205,\"height\":97,\"caption\":\"Sisgeo S.r.l.\"},\"image\":{\"@id\":\"https:\/\/sisgeo.com\/de\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/sisgeo.com\/de\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2\",\"name\":\"Staff Pipeline\",\"sameAs\":[\"https:\/\/www.pipeline.it\/\"],\"url\":\"https:\/\/sisgeo.com\/de\/author\/staff-pipeline\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"FAQ#118 - Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe? - Sisgeo","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/","og_locale":"de_DE","og_type":"article","og_title":"FAQ#118 - Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?","og_description":"No, this is not possible.Sisgeo calibrates each probe individually, but each probe has its own small different properties, that have a certain influence on the readings. The international standard ISO 18674-3, describing the reference reading, states that:„It is good practice to take an additional reference measurement with an independent probe that can be used as […]","og_url":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/","og_site_name":"Sisgeo","article_published_time":"2023-07-24T16:21:02+00:00","author":"Staff Pipeline","twitter_card":"summary_large_image","twitter_misc":{"Verfasst von":"Staff Pipeline","Gesch\u00e4tzte Lesezeit":"1\u00a0Minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/#article","isPartOf":{"@id":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/"},"author":{"name":"Staff Pipeline","@id":"https:\/\/sisgeo.com\/de\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2"},"headline":"FAQ#118 – Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?","datePublished":"2023-07-24T16:21:02+00:00","mainEntityOfPage":{"@id":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/"},"wordCount":248,"publisher":{"@id":"https:\/\/sisgeo.com\/de\/#organization"},"keywords":["H\u00c4UFIG GESTELLTE FRAGEN"],"articleSection":["B.R.A.IN MEMS-sonden-neigungsmesser","Digital-Inklinometer mit MEMS-Sensoren","KLION software for inclinometers and T-Rex extensometers"],"inLanguage":"de"},{"@type":"WebPage","@id":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/","url":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/","name":"FAQ#118 - Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe? - Sisgeo","isPartOf":{"@id":"https:\/\/sisgeo.com\/de\/#website"},"datePublished":"2023-07-24T16:21:02+00:00","breadcrumb":{"@id":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/sisgeo.com\/de\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/is-it-possible-to-use-the-reference-reading-zero-reading-taken-with-a-digital-inclinometer-probe-as-a-reference-reading-for-another-digital-inclinometer-probe\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/sisgeo.com\/de\/geotechnische-und-strukturelle-instrumentierung-fuer-shm\/"},{"@type":"ListItem","position":2,"name":"Produkte","item":"https:\/\/sisgeo.com\/de\/category\/products-de-2\/"},{"@type":"ListItem","position":3,"name":"B.R.A.IN MEMS-Sonden-Neigungsmesser","item":"https:\/\/sisgeo.com\/de\/category\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/"},{"@type":"ListItem","position":4,"name":"B.R.A.IN MEMS-sonden-neigungsmesser","item":"https:\/\/sisgeo.com\/de\/category\/products-de-2\/b-r-a-in-mems-sonden-neigungsmesser\/b-r-a-in-mems-sonden-neigungsmesser-de\/"},{"@type":"ListItem","position":5,"name":"FAQ#118 – Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?"}]},{"@type":"WebSite","@id":"https:\/\/sisgeo.com\/de\/#website","url":"https:\/\/sisgeo.com\/de\/","name":"Sisgeo","description":"Inclined to improvement","publisher":{"@id":"https:\/\/sisgeo.com\/de\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/sisgeo.com\/de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/sisgeo.com\/de\/#organization","name":"Sisgeo S.r.l.","url":"https:\/\/sisgeo.com\/de\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/sisgeo.com\/de\/#\/schema\/logo\/image\/","url":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png","contentUrl":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png","width":205,"height":97,"caption":"Sisgeo S.r.l."},"image":{"@id":"https:\/\/sisgeo.com\/de\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/sisgeo.com\/de\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2","name":"Staff Pipeline","sameAs":["https:\/\/www.pipeline.it\/"],"url":"https:\/\/sisgeo.com\/de\/author\/staff-pipeline\/"}]}},"_links":{"self":[{"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/posts\/21792","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/comments?post=21792"}],"version-history":[{"count":0,"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/posts\/21792\/revisions"}],"wp:attachment":[{"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/media?parent=21792"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/categories?post=21792"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sisgeo.com\/de\/wp-json\/wp\/v2\/tags?post=21792"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}