{"id":21801,"date":"2023-07-24T18:13:43","date_gmt":"2023-07-24T16:13:43","guid":{"rendered":"https:\/\/sisgeo.com\/sin-categorizar\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/"},"modified":"2024-09-13T12:04:21","modified_gmt":"2024-09-13T10:04:21","slug":"how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors","status":"publish","type":"post","link":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/","title":{"rendered":"FAQ#116 – How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?"},"content":{"rendered":"\n

Sisgeo digital instruments can operate in two powering modes: TIMED or ALWAYS-ON (for more information see F.A.Q.#094<\/a>).
A string of mixed instruments consisting of TIMED gauges and ALWAYS-ON gauges cannot work.
The first thing to do is therefore to check that ALL connected instruments in your array are set to TIMED mode.
You can check the powering mode of your gauges in the calibration reports of each instrument as in the example below.
The numbers \u00ab3-3\u00bb after \u00abTIMED\u00bb are the \u00abwarming delay\u00bb and \u00abaddress delay\u00bb values to be entered in the APP wizard set-up page.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

In order to correctly set-up the WR-Log app for reading a string of Sisgeo digital gauges in TIMED powering mode, please follow the next screenshot as example:<\/p>\n\n\n\n

– choose the protocol \u00abSisgeo v3\u00bb\u00a0(for uniaxial or biaxial gauges) or other \u00ab360\u00bb protocol for tri-axial gauges
– insert the correspondent Warming delay value (in our example 3)
– insert the correspondent Adress delay value (in our example 3)
– insert the addresses of the gauges in your string, separated by comma without any space, in ASCENDING order (do NOT inser the addresses in random order!)
NOTE: in TIMED mode, the reading time is about WARMING_DELAY x HIGHER_RS485_ADDRESS, in our case 3 x 20 = about 60 seconds.
So, if your string is composed by 20 gauges BUT with addresses from 200 to 220, the reading time is about 3 x 220 = 660 seconts (11 minutes) to read the same 20 gauges. So that, is really important to correctly set-up the addresses of the gauges of the string to be read.<\/p>\n\n\n\n

\"\"<\/figure>\n","protected":false},"excerpt":{"rendered":"

Sisgeo digital instruments can operate in two powering modes: TIMED or ALWAYS-ON (for more information see F.A.Q.#094).A string of mixed instruments consisting of TIMED gauges and ALWAYS-ON gauges cannot work.The first thing to do is therefore to check that ALL connected instruments in your array are set to TIMED mode.You can check the powering mode […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[584,702,560,678,554,563,578,571,575,711,491],"tags":[230],"class_list":["post-21801","post","type-post","status-publish","format-standard","hentry","category-celdas-de-carga-electricas-para-anclajes","category-d-clinometro-clinometros-digitales-con-tecnologia-mems","category-extensometros-dex-y-extenso-inclinometros-dex-s-es","category-h-level-sistema-de-monitoreo-de-asentamientos","category-inclinometros-fijos-bh-profile","category-inclinometros-fijos-horizontales","category-inclinometros-fijos-mems","category-lt-inclibus-es","category-md-profile-system","category-sensores-tilt-beam-tb","category-wr-log-wireless-dataloggers-es","tag-faq-es"],"yoast_head":"\nFAQ#116 - How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors? - Sisgeo<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"FAQ#116 - How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?\" \/>\n<meta property=\"og:description\" content=\"Sisgeo digital instruments can operate in two powering modes: TIMED or ALWAYS-ON (for more information see F.A.Q.#094).A string of mixed instruments consisting of TIMED gauges and ALWAYS-ON gauges cannot work.The first thing to do is therefore to check that ALL connected instruments in your array are set to TIMED mode.You can check the powering mode […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\" \/>\n<meta property=\"og:site_name\" content=\"Sisgeo\" \/>\n<meta property=\"article:published_time\" content=\"2023-07-24T16:13:43+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-09-13T10:04:21+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png\" \/>\n<meta name=\"author\" content=\"Staff Pipeline\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"Staff Pipeline\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minuto\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\"},\"author\":{\"name\":\"Staff Pipeline\",\"@id\":\"https:\/\/sisgeo.com\/es\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2\"},\"headline\":\"FAQ#116 – How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?\",\"datePublished\":\"2023-07-24T16:13:43+00:00\",\"dateModified\":\"2024-09-13T10:04:21+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\"},\"wordCount\":269,\"publisher\":{\"@id\":\"https:\/\/sisgeo.com\/es\/#organization\"},\"image\":{\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png\",\"keywords\":[\"PREGUNTAS M\u00c1S FRECUENTES\"],\"articleSection\":[\"Celdas de carga el\u00e9ctricas para anclajes\",\"D-CLIN\u00d3METRO \u2013 clin\u00f3metros digitales con tecnolog\u00eda MEMS\",\"Extens\u00f3metros DEX y extens\u00f3-inclin\u00f3metros DEX-S\",\"H-Level - Sistema de monitoreo de Asentamientos\",\"Inclin\u00f3metros fijos BH-Profile\",\"Inclinometros fijos horizontales\",\"Inclin\u00f3metros Fijos MEMS\",\"LT-Inclibus\",\"MD-Profile system\",\"Sensores Tilt Beam (TB)\",\"WR LOG wireless dataloggers\"],\"inLanguage\":\"es\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\",\"url\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\",\"name\":\"FAQ#116 - How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors? - Sisgeo\",\"isPartOf\":{\"@id\":\"https:\/\/sisgeo.com\/es\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png\",\"datePublished\":\"2023-07-24T16:13:43+00:00\",\"dateModified\":\"2024-09-13T10:04:21+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage\",\"url\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png\",\"contentUrl\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/sisgeo.com\/es\/geotechnical-and-structural-instrumentation-for-shm\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Productos\",\"item\":\"https:\/\/sisgeo.com\/es\/category\/products-es-2\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Inclin\u00f3metros in situ IPI\",\"item\":\"https:\/\/sisgeo.com\/es\/category\/products-es-2\/inclinometros-in-situ-ipi\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Inclin\u00f3metros Fijos MEMS\",\"item\":\"https:\/\/sisgeo.com\/es\/category\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"FAQ#116 – How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/sisgeo.com\/es\/#website\",\"url\":\"https:\/\/sisgeo.com\/es\/\",\"name\":\"Sisgeo\",\"description\":\"Inclined to improvement\",\"publisher\":{\"@id\":\"https:\/\/sisgeo.com\/es\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/sisgeo.com\/es\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/sisgeo.com\/es\/#organization\",\"name\":\"Sisgeo S.r.l.\",\"url\":\"https:\/\/sisgeo.com\/es\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\/\/sisgeo.com\/es\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png\",\"contentUrl\":\"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png\",\"width\":205,\"height\":97,\"caption\":\"Sisgeo S.r.l.\"},\"image\":{\"@id\":\"https:\/\/sisgeo.com\/es\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/sisgeo.com\/es\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2\",\"name\":\"Staff Pipeline\",\"sameAs\":[\"https:\/\/www.pipeline.it\/\"],\"url\":\"https:\/\/sisgeo.com\/es\/author\/staff-pipeline\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"FAQ#116 - How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors? - Sisgeo","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/","og_locale":"es_ES","og_type":"article","og_title":"FAQ#116 - How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?","og_description":"Sisgeo digital instruments can operate in two powering modes: TIMED or ALWAYS-ON (for more information see F.A.Q.#094).A string of mixed instruments consisting of TIMED gauges and ALWAYS-ON gauges cannot work.The first thing to do is therefore to check that ALL connected instruments in your array are set to TIMED mode.You can check the powering mode […]","og_url":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/","og_site_name":"Sisgeo","article_published_time":"2023-07-24T16:13:43+00:00","article_modified_time":"2024-09-13T10:04:21+00:00","og_image":[{"url":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png","type":"","width":"","height":""}],"author":"Staff Pipeline","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"Staff Pipeline","Tiempo de lectura":"1 minuto"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#article","isPartOf":{"@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/"},"author":{"name":"Staff Pipeline","@id":"https:\/\/sisgeo.com\/es\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2"},"headline":"FAQ#116 – How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?","datePublished":"2023-07-24T16:13:43+00:00","dateModified":"2024-09-13T10:04:21+00:00","mainEntityOfPage":{"@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/"},"wordCount":269,"publisher":{"@id":"https:\/\/sisgeo.com\/es\/#organization"},"image":{"@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage"},"thumbnailUrl":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png","keywords":["PREGUNTAS M\u00c1S FRECUENTES"],"articleSection":["Celdas de carga el\u00e9ctricas para anclajes","D-CLIN\u00d3METRO \u2013 clin\u00f3metros digitales con tecnolog\u00eda MEMS","Extens\u00f3metros DEX y extens\u00f3-inclin\u00f3metros DEX-S","H-Level - Sistema de monitoreo de Asentamientos","Inclin\u00f3metros fijos BH-Profile","Inclinometros fijos horizontales","Inclin\u00f3metros Fijos MEMS","LT-Inclibus","MD-Profile system","Sensores Tilt Beam (TB)","WR LOG wireless dataloggers"],"inLanguage":"es"},{"@type":"WebPage","@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/","url":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/","name":"FAQ#116 - How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors? - Sisgeo","isPartOf":{"@id":"https:\/\/sisgeo.com\/es\/#website"},"primaryImageOfPage":{"@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage"},"image":{"@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage"},"thumbnailUrl":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png","datePublished":"2023-07-24T16:13:43+00:00","dateModified":"2024-09-13T10:04:21+00:00","breadcrumb":{"@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/"]}]},{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#primaryimage","url":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png","contentUrl":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/07\/TIMED_example.png"},{"@type":"BreadcrumbList","@id":"https:\/\/sisgeo.com\/es\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/how-do-i-configure-a-wr-log-digital-node-to-read-rs485-sisgeo-timed-sensors\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/sisgeo.com\/es\/geotechnical-and-structural-instrumentation-for-shm\/"},{"@type":"ListItem","position":2,"name":"Productos","item":"https:\/\/sisgeo.com\/es\/category\/products-es-2\/"},{"@type":"ListItem","position":3,"name":"Inclin\u00f3metros in situ IPI","item":"https:\/\/sisgeo.com\/es\/category\/products-es-2\/inclinometros-in-situ-ipi\/"},{"@type":"ListItem","position":4,"name":"Inclin\u00f3metros Fijos MEMS","item":"https:\/\/sisgeo.com\/es\/category\/products-es-2\/inclinometros-in-situ-ipi\/inclinometros-fijos-mems\/"},{"@type":"ListItem","position":5,"name":"FAQ#116 – How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?"}]},{"@type":"WebSite","@id":"https:\/\/sisgeo.com\/es\/#website","url":"https:\/\/sisgeo.com\/es\/","name":"Sisgeo","description":"Inclined to improvement","publisher":{"@id":"https:\/\/sisgeo.com\/es\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/sisgeo.com\/es\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/sisgeo.com\/es\/#organization","name":"Sisgeo S.r.l.","url":"https:\/\/sisgeo.com\/es\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/sisgeo.com\/es\/#\/schema\/logo\/image\/","url":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png","contentUrl":"https:\/\/sisgeodev.pipehosting.it\/wp-content\/uploads\/2023\/06\/logo-RGB.png","width":205,"height":97,"caption":"Sisgeo S.r.l."},"image":{"@id":"https:\/\/sisgeo.com\/es\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/sisgeo.com\/es\/#\/schema\/person\/ad7e82c7990ef88823f081613e1100e2","name":"Staff Pipeline","sameAs":["https:\/\/www.pipeline.it\/"],"url":"https:\/\/sisgeo.com\/es\/author\/staff-pipeline\/"}]}},"_links":{"self":[{"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/posts\/21801","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/comments?post=21801"}],"version-history":[{"count":1,"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/posts\/21801\/revisions"}],"predecessor-version":[{"id":26052,"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/posts\/21801\/revisions\/26052"}],"wp:attachment":[{"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/media?parent=21801"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/categories?post=21801"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sisgeo.com\/es\/wp-json\/wp\/v2\/tags?post=21801"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}