FAQ#006 – Is it possible to use the ANS adjustable support for the pendulum optical manual readout (coordinometer)?
The pendulum readout fixing plate has four holes so it can be fixed, through screws, to the “ANS” adjustable support.
FAQ#005 – Is it possible to fix the ANS adjustable support to the floor?
Since the “ANS” support is articulated, it can be fixed to the floor; this can be useful in case the pendulum’s wire is too far from the walls.
FAQ#004 – Is it possible to place the SUS optical sensor unit with the X axis perpendicular to the wall where the ANS support is fixed?
The TEL-310S telecoordinometer has the following measuring range: To use the “ANS” adjustable support you must have the “X” axis parallel to the wall: so it is not possible to fix the “SUS” optical sensor unit perpendicular to the wall using the “ANS” adjustable support.
FAQ#003 – Which are the needed conditions to use the ANS adjustable support for TEL-310S if you need to monitor the direct pendulum’s wire?
To fix the “SUS” optical sensor unit through the “ANS” support, it is necessary that the direct pendulum’s wire is at a distance of d=230 mm. from the wall. To achieve that, the direct pendulum’s tank has to be placed at a distance of D=20 mm. from the wall: in this way is guaranteed that […]
FAQ#002 – What is the 0TEL310ANS0 adjustable support for TEL-310S and what is it for?
The “ANS” adjustable support (0TEL310ANS0) has been developed to support and fix the “SUS” optical sensor unit (0TEL310SUS0) of the new TEL-310S telecoordinometer. The support is fixed to the wall through two M16 threaded bars, of 370 mm. length (supplied). Once the “SUS” optical sensor unit is fixed to the support, it is possible to […]
FAQ#001 – If the SUS optical sensor unit is removed for maintenance, is it possible to continue the monitoring using the pendulum optical manual readout?
It is possible to use the pendulum optical manual readout instead of TEL-310S “SUS” optical sensor unit without any regulation of the “ANS” support. It is also possible to start the pendulum’s monitoring with the pendulum optical manual readout and then automate the readings with TEL-310S telecoordinometer , without changing its initial zero.
V-Messwehre und Durchflussmesser
V-Messwehre und Durchflussmesser Codes der Referenzprodukte: QV, QVML, QVLIV, P252Q Durchflussmessung in offenen Gerinnen ist in der Geotechnik, in der Abwasserbehandlung und im Wasserhaltung bei Baugruben und Bauwerken wichtig. Sickerwassermessungen sind notwendig um die Sicherheit von Talsperren, Erddämmen, Schüttdämmen und Betonstaumauern zu gewährleisten. Die Sickerwassermenge einer Talsperre ist vom Seewasserstand abhängig. Sie wird während dem […]
Wasserlichtlote und Pegellatten
Wasserlichtlote und Pegellatten Codes der Referenzprodukte: C112, C112T, HIDR Wasserlichtlote werden zur Ermittlung von Grundwasserständen in Piezometerrohren, Grundwasserpegeln, Brunnen und Casagrande-Pegeln eingesetzt. Die batteriebetriebene Messsonde ist an einem, auf einer Rolle aufgewickelten, Messband montiert. Kommt die Messsonde in Kontakt mit dem Wasser, wird ein Summer (akustischer Signalgeber) und ein Signallicht aktiviert. In dem Moment wird […]
Casagrande und Standrohr-Piezometer
Casagrande und Standrohr-Piezometer Codes der Referenzprodukte: P101, P112, P112A, TCH, TFH Casagrande-Grundwasserpegel werden zur Ermittlung von Wasserdrücken und Wasserständen in durchlässigem Boden und Fels eingesetzt. Der Filter besteht aus hochdichtem Sinter-Polyethylen. Casagrande Piezometer können manuell mit einem Wasserlichtlote und Pegellatten oder automatisch mit einem an den OMNIAlog-Datenlogger angeschlossenen Messwertaufnehmer (Removable Pressure Transducers, Vented pressure transducers […]
Drive-in piezometers
Drive-in piezometers Codes der Referenzprodukte: PK45I, P235I Drive-in piezometers, also called push-in piezometers, are designed for installation in soft clays, organic or fine grained cohesionless soils. The piezometers are pushed directly into the soil using conventional cone penetrometer or drilling rods with adapters. The large diameter nose cone decreases the chance of overpressure while the […]
Titanium piezometers
Titanium piezometers Codes der Referenzprodukte: P235TI Piezo-resistive titanium piezometers are designed to operate in corrosive environments, such as salt water, tailings, and landfills. Resistance to corrosion is provided by a titanium body, ceramic diaphragm, polyethelene or ceramic filter, and acid-resistant signal cable. The robust 4-20mA output is compatible with most readouts (as CRD-400) and data […]
Removable pressure transducers
Removable pressure transducers Codes der Referenzprodukte: PK45C, P252C The removable pressure transducer is designed to measure pore-water pressure through a special Casagrande filter tip. This unique design is especially suitable for long-term monitoring since it allows the instrument to be withdrawn for calibration checks. The removable pressure transducer can be supplied with either vibrating wire […]
