Explore Eddyfi Technologies Product Lines ▼

FAQ#025 – How get good readings with inclinometer probe?

A good practice for getting good readings with inclinometer probe is to follow these simple operations: – Use the same probe for each survey, if possible; – if you must use a different probe, be sure to note the serial number of the probe used for each survey, so any necessary corrections can be made during data processing; – protect the probe from shock, which contributes to zero shift and sensor rotation.

Transport the probe in its carrying case. – power up the probe before you lower it into the borehole. – wait 10 minutes for the probe to adjust to the temperature of the borehole up to the displayed readings will be stabilized within two units and validate data; – validate data on site using checksum statistics, if you are using the Nadir readout.

Erfasste Produkte:

Explore Eddyfi Technologies product lines

Remote Monitoring Solutions Icon Remote Monitoring Solutions
Nuclear Steam Generator Icon Nuclear Steam Generators
Automated Vision System Icon Automated Vision Systems
Robotics Solutions Icon Robotics Solutions
ET/UT Solutions Icon ET & UT Solutions

Sisgeo Piezometers: Comprehensive Solutions for Groundwater Monitoring

What You’ll Learn:

  • Detailed overview of Sisgeo’s range of piezometer technologies including vibrating wire and electric piezometers, outlining their operating principles, installation methods, and suitability for diverse site conditions.
  • Selection of piezometer filters, emphasizing materials and designs that conform to ISO 18674-4 standards.
  • Integration of piezometer data with automated acquisition systems.
  • Best practices for calibration and maintenance standards.

When:Thu, Jul 31, 2025 3:00 PM – 4:00 PM CEST
Language: English

Sisgeo presents the new MD-Profile IPI with 360° calibration
Discover the next generation of In-Place Inclinometers for geotechnical monitoring!

The new MD-Profile 360° features:

  • new removable pressors available for 3 different tube ID
  • new triaxial calibration over the entire 360° range
  • even stronger connectors

When: 27/05/2025 3:00 PM – 3:30 PM GMT+1
Language
: English