FAQ#092 – If I us a WR-LOG wireless system, when data will be available on the Gateway (SLOT TIME) and on my FTP?
WR-LOG system can send three type of data:– Nodes data file– Nodes health file– Compacted or Custom Compacted fileIn order to optimize the availability time, the Sampling Rate (SR) of each node must be inserted into the Gateway, so that Sisgeo STRONGLY SUGGEST to insert the sampling rates of each node into the Gateway.If the […]
FAQ#091 – How can I read data from 0MEPR106000 barometer in engineering units?
The Barometer model 0MEPR106000 have a 4-20mA current loop output.The measuring range is from 800 mbar (equivalent to 4 mA) to 1200 mbar (equivalent to 20 mA). Manual readings are taken connecting the wires to a readout according to the following instructions: Signal: 4-20mA current loop Red: + LoopBlack: – Loop The following formula allows […]
FAQ#090 – Are the old 16/32 ch multiplexers compatible with OMNIAlog?
The available gateways for WR LOG system are: – 0LSWR868GW0 – 0LSWR915GW0 – 0LSWR923GW0 These models differ from the frequency utilized by the internal 2G/3G modem. In order to choose for the right gateway, please refer to the document to be downloaded. If more than one model is suggested for the installation Country, you have […]
FAQ#089 – Which is Gateway model to choose for WR LOG wireless system?
The available gateways for WR LOG system are: – 0LSWR868GW0 – 0LSWR915GW0 – 0LSWR923GW0 These models differ from the frequency utilized by the internal 2G/3G modem. In order to choose for the right gateway, please refer to the document to be downloaded. If more than one model is suggested for the installation Country, you have […]
FAQ#088 – Which is the IP protection class of Sisgeo junction boxes?
Sisgeo junction boxes have IP67 protection.The IP class is granted if the cable glands are correctly tight and the cover is mounted respecting the right key position, as for the following pictures:
FAQ#087 – Could the IPI, BH Profile and DEX probes have problems in frozen water?
Sisgeo suggest that frozen water within the inclinometer casings is to be avoided due to following reasons: – Ice within the casing will affect functionality of the systems by blocking the individual probes;– Mechanical damages can occur to the probes, but also to the inclinometer casing due to the expansion of frozen water In any […]
FAQ#086 – ¿Cómo resolver el problema con la conexión remota «dial-up» en Windows con algunos idiomas?
Creando una conexión remota «dial-up» para comunicar con miniOMNIAlog en alguna versión de Windows en lenguas distintas del Italiano e Inglés, puede aparecer un error inherente a los drivers del módem Standard 56000bps utilizado para la conexión. Este problema puede presentarse tanto configurando la conexión manualmente, como utilizando el software proporcionado por SISGEO “miniOMNIAlog Connection […]
FAQ#083 – ¿Cómo funciona la función de activación de la entrada digital OMNIAlog?
La función de disparo de las dos entradas digitales disponibles en registrador de datos OMNIAlog se suele utilizar con la estación sísmica. En caso de un evento (terremoto), la estación sísmica suele ser capaz de suministrar una cierta tensión en su salida (normalmente 5 Vdc). Si esta salida está conectada a la entrada digital de […]
FAQ#082 – ¿Hay alguna precaución a adoptar por el número de mediciones guardadas en la memoria OMNIAlog / Mini OMNIAlog?
El OMNIAlog está equipado con una memoria microSD de 2GB. Esta memoria permite guardar un número muy elevado de lecturas. Por esta razón, es necesario tener en cuenta lo siguiente: Por lo tanto SISGEO sugiere descargar periódicamente los datos y,posteriormente, borrarlos de la memoria OMNIAlog. De esta manera se garantiza una descarga de datos eficiente.
FAQ#081 – ¿Cual es la longitud de cable maxima para la sonda DEX y DEX-S?
La longitud de cable maxima para la sonda dEX al datalogger es 200m. Si el sistema de adquisicion de datos incluye una caja multiplexer externa, la longitud de cable es 200m desde la sonda DEX hasta el multiplexer mas 200 m desde el multiplexer hasta el OMNIALOG (en total 400m).
FAQ#080 – ¿Que dimensiones tiene el archivo .CSV en columnas que contienen las mediciones adquiridas con OMNIAlog y miniOMNIAlog?
Las dimensiones del archivo de mediciones “en columnas” descargado con el OMNIAlog y el miniOMNIAlog varia de acuerdo con el numero de sensores adquiridos y los cilos de adquisicion almacenados. Mientras mas alto sea el numero de sensores adquiridos y el numero de ciclos de adquisicion almacenados, mas grande sera la dimension del archive. Puede […]
FAQ#079 – ¿Es posible enviar SMS en caso de alarmas con miniOMNIAlog?
Si, el miniOMNIAlog esta equipado con modem 2G (GSM/GPRS). Naturalmente, el usuario user debe ya tener configuradas las paginas web relativas.