Inclinomètres fixes « IPI »

IPI (In-Place Inclinometer) est un type de système inclinométrique utilisé dans la surveillance géotechnique lorsqu’une fréquence élevée de lectures du tube inclinométrique et une acquisition automatique des données sont nécessaires. Les sondes IPI sont spécialement conçues pour mesurer le déplacement latéral ou la déformation des sols ou de la roche dans diverses applications géotechniques. Les […]

BRAIN sonde inclinometrique MEMS

Le système inclinométrique BRAIN est un dispositif utilisé pour mesurer les déplacements dans le sol ou sous les structures. Il est particulièrement utile pour évaluer la stabilité des pentes, des talus, des murs de soutènement et d’autres structures susceptibles de bouger ou de se déformer. En mesurant le changement d’inclinaison dans le temps, les inclinomètres […]

Sakhalin-2 project Russia

The Sakhalin II project is an oil and gas development project on Sakhalin Island and immediately offshore, in the Sea of Okhotsk, from two fields: Piltun-Astokhskoye and Lunskoye. Piltun-Astokhskoye is primarily an oil field, and Lunskoye is primarily a gas field. The project has been met with heavy criticism over the potential environmental impact, which […]

Cleaning-up project of Panama City and Bay

The cleaning-up project of Panama City and Bay includes: Construction of Health Service networks Construction and rehabilitation of Collectors and Drive lines Interceptor system Plant for wastewater treatment. These elements will be developed to collect, transport and treat wastewater of Panama City which is currently discharged directly into the bay or rivers and streams in […]

FAQ#121 – Why can’t I connect the WR-log node to my mobile phone/tablet?

Make sure ALL the following steps are verified: Sisgeo successfully uses the mobile phone model « BLACKVIEW BV4900 PRO » for all its tests with WR-Log system

FAQ#120 – Why can’t I connect the MIND readout to my mobile phone/tablet?

Make sure that ALL the following steps are checked:1. The batteries of the mobile phone/tablet and the MIND readout are charged2. You have installed the latest version of the MIND APP (check the Google Play Store)3. The version of the mobile phone/tablet’s operating system is Android 10 or higher4. The Bluetooth version of the mobile […]

FAQ#119 – Why can’t I connect the BRAIN reel to my mobile phone/tablet? Have I connected correctly my BRAIN measuring system?

Make sure that ALL the following steps are checked:1. The batteries of the mobile phone/tablet and the BRAIN system are charged2. You have installed the latest version of the BRAIN APP (check the Google Play Store or Apple Store)3. The version of the mobile phone/tablet’s operating system is Android 7 or higher, or iOS 11 […]

FAQ#118 – Is it possible to use the reference reading (zero reading) taken with a digital inclinometer probe as a reference reading for another digital inclinometer probe?

No, this is not possible.Sisgeo calibrates each probe individually, but each probe has its own small different properties, that have a certain influence on the readings. The international standard ISO 18674-3, describing the reference reading, states that:« It is good practice to take an additional reference measurement with an independent probe that can be used as […]

FAQ#117 – WHY CANT I CONNECT MY ANDROID DEVICE TO B.R.A.IN INCLINOMETER SYSTEM?

Preliminary verifications: • B.R.A.IN reel’s battery is charged• Your mobile or tablet has the following minimum features:          Bluetooth Low Energy BLE 4.2 or higher          Android OS 7 or higher If the preliminary verification is positive, please proceed as follows:• Un-install the B.R.A.IN app from your device (if […]

FAQ#116 – How do I configure a WR-Log digital node to read RS485 Sisgeo TIMED sensors?

Sisgeo digital instruments can operate in two powering modes: TIMED or ALWAYS-ON (for more information see F.A.Q.#094).A string of mixed instruments consisting of TIMED gauges and ALWAYS-ON gauges cannot work.The first thing to do is therefore to check that ALL connected instruments in your array are set to TIMED mode.You can check the powering mode […]

FAQ#115 – What is the best power supply for the OMNIAlog logger used to manage the FLX-Rail system?

The OMNIAlog logger for FLX-Rail has a fairly high power consumption due to the router.If OMNIAlog is set to send data through the router after each acquisition (so every 5 minutes) it needs to be powered from the network (e.g. 220Vac)If OMNIAlog is set to send data through the router once a day, it can […]

FAQ#113 – Why I’m not able to connect my mobile/tablet to MIND readout?

Verify that the mobile phone/tablet used does have the minimum required features:Bluetooth Low Energy BLE 4.2APPLE iOS 14 or higherAndroid OS 9 (suggested Android OS 10 or higher) Then please check that the mobile phone/tablet has Bluetooth on and that the MIND unit has a sufficiently charged battery.