Vibrating Wire multipoint piezometers
Codes der Referenzprodukte: PK20M
Multipoint vibrating wire piezometers, also called multilevel piezometers, provide measurements of pore-water pressure at different elevations in the same borehole.
Isolation of the pore-water pressure at each elevation is achieved by the fully-grouted installation method.
APPLICATIONS
• Measurement of ground water pressure at different elevations
• Monitoring soil consolidation activities
• Dams and fill embankments
• Landslides monitoring
• Natural or cut slope sites
• Deep excavation
FEATURES
• Simple installation
• Long-term stability
• Cable length does not affect reading
• Long working life and reliability
• Built-in surge protection (overvoltage)
• Built-in temperature sensor
• Hermetically sealed
Vibrating wire transducer is essentially composed by a taut wire clamped at its ends and tensioned so that it is free to vibrate at its natural frequency. The frequency of vibration varies with the wire tension and thus small relative movements between the two end clamps.
With VW transducers frequencies rather than voltage levels are measured, so a dedicated readout/datalogger must be used to measure the resonant frequency. These ones excites the VW transducer, measures the response, performs some calculations on the response, and returns the result.
SISGEO VW transducer uses ‚pluck and read‘ method and not ‚auto resonant‘ method; when the readout/datalogger plucks the wire a magnetic attraction is created to the coil and the wire start to vibrate and it causes an alternating voltage of the same frequency of the natural frequency of the wire; the voltage signal is transmitted on the cable and read from the readout/datalogger.
VW transducers have a reputation for long expected life and long-term stability.
Messen Mit
Fragen
zu diesem
produkt?
zu diesem
produkt?
Fragen
zu diesem
produkt?
zu diesem
produkt?
Datenblatt
Handbuch
Faq
Verwandte
Produkte
Titanium piezometers
Piezo-Resistive piezometers
Schwingsaiten- und Mehrfachpiezometer
Was ist ein Piezometer, wie funktioniert es, verfügbare Technologien und Modelle
Was ist ein Piezometer, wie funktioniert es, verfügbare Technologien und Modelle
Mit dieser Videopräsentation möchten wir den Begriff „Piezometer“, seine verschiedenen Klassifizierungen (z. B. Piezometer mit offenem Kreislauf und Piezometer mit geschlossenem Kreislauf), die zur Überwachung von Piezometern verfügbaren Technologien (z. B. Piezometer mit vibrierendem Draht und piezoresistive) und die Die wichtigsten verfügbaren Modelle und Lösungen.