Mini OMNIAlog datalogger

Reference products codes: MINIOMNIA


Mini OMNIAlog is a 4-channels datalogger designed for hard environment field use; it groups both high measurement accuracy, simple installation and web-based management software.



  • No software required
  • USB 2.0 Comm ports
  • High performances over all working temperature range
    (-30°C +70°C)
  • 2GB internal memory
  • Vibrating wire built-in interface
  • Excellent value for money
  • Compatible with all major geotechnical sensors




FAQ#111 - Why I cannot read correctly my 4-20mA current loop gauge?

FAQ#073 - Which is the maximum number of digitized sensors (RS-485, Modbus), the maximum number of chains and the maximum length of cable in a RS-485 network?

FAQ#086 - How to solve the problem with dial-up connection under Windows in some languages version

FAQ#050 - Are SMTPS (SSL) and SFTP supported by miniOMNIAlog?

FAQ#072 - Why pushing RUN in a miniOMNIAlog webpage with 3G/2G modem the local connection with the PC gets lost?

FAQ#053 - SIM card for 3G/2G Modem

FAQ#082 – Is there any precaution to adopt for the number of measurements saved on the OMNIAlog / miniOMNIAlog memory?

FAQ#080 - What dimensions has the .CSV file in columns that contains the measures acquired with OMNIAlog and miniOMNIAlog?

FAQ#079 - Is it possible to send SMS in case of alarms with miniOMNIAlog?

FAQ#076 - Why it is necessary add a termination resistor to the last digitized sensor of each RS-485 chain?

FAQ#074 - Which kind of datalogger is necessary to read a SISGEO digital sensors?

FAQ#071 - Why miniOMNIAlog is supplied through the PC when it is connected through USB?

FAQ#070 - If you disconnect the USB cable from miniOMNIAlog, the datalogger resets. Is it normal?

FAQ#069 - If miniOMNIAlog is supplied with internal batteries, can it read the digitized sensors SISGEO?

FAQ#068 - Using miniOMNIAlog, is it possible to do acquisitions leaving it connected to the PC?

FAQ#067 - Is it possible to avoid the manual configuration of the dial-up remote connection and of the virtual modem necessary to communicate with miniOMNIAlog?

FAQ#066 - Why opening the file of log .CSV of OMNIAlog/miniOMNIAlog in French with Microsoft Office Excel some “strange” characters are visualized instead of some letters?

FAQ#061 - Does the 2G (GSM/GPRS) modem of miniOMNIAlog support 3G networks?

FAQ#059 - Which characters is it possible to use in the editable fields of miniOMNIAlog webpages?

FAQ#058 - To communicate through USB connection with miniOMNIAlog, is it necessary to install some software or driver?

FAQ#055 - Using the miniOMNIAlog system, is it necessary the grounding system?

FAQ#054 - Can the connected PC power the miniOMNIAlog?

FAQ#052 - Is it necessary to use an isolated USB cable?

FAQ#051 - Which communication interfaces are possible to use with miniOMNIAlog?

FAQ#049 - Does miniOMNIAlog support remote connection?

FAQ#048 - Is it possible to use an Apple Mac to manage a miniOMNIAlog?

FAQ#047 - Is it possible to change channels configuration of miniOMNIAlog?

FAQ#032 - Which is the reading method of the new generation of SISGEO vibrating wire readouts and loggers?


The new small-size logger with GPRS modem and battery power supply.
Wednesday, 16 October 2013
Thursday, 07 September 2017